ESCH Textile Flocking Systems:flock dosing unit
FLOCK DOSING UNITS
European Patent Numbers: 0095515, 0095566, 121851;
The machine is designed for the processing of all types of cut flock fibers known on the market for direct-charging systems. The electrostatic equipment of the machine is designed according to the valid VDE and CE regulations.
The brush strips have a metal coating and can be installed to be turned over. To avoid destruction of the brush strips and screens due to improper setting, a guard device for the brushes and stabilizers is installed. The brush body can be set at distance to the screen from the outside without any mounting work. This ensures that the screened flock can be exactly dosed and distributed over the entire width. The dosing unit contains 4 insulators for the dosing chamber, known on the market for direct-charging systems. As mentioned above, the electrostatic equipment of the machine meets the VDE and CE regualations.
One welded steel-plated dosing chamber with a puncture-proof insulation on the outside. The dosing chamber is equipped with one or two brush shafts with ball bearing and with joint-ring sealing. Mounted onto the brush shaft are the holders for the brush strips with an accurate spacing and clamping device.
Technical Data:
Working width 1,600 mm
Flock dosing width 1,800 mm
Welded steel-plated dosing chambers with a puncture-pr7oof insulation on the outside. The dosing chamber is equipped with two brush shafts with ball bearing and with joint ring sealing. Mounted onto the brush shafts are the holders for the brush strips with an accurate spacing and clamping device.
The brush strips have a metal coating and can be installed to be turned over.
To avoid destruction of the brush strips and screens by improper setting, a guard device for the brushes and stabilizers is installed. The brush body can be set at a distance to the screen from the outside without any mounting work. This ensures that the screened flock can be exactly dosed and distributed over the entire width +/- 1%.
Flock agglomeration extracting facility. The side wall can be lifted with a pneumatic cylinder. It is opened and closed manually or automatically, to extract the flock agglomerats.
Includes 4 insulators for the dosing chambers, 2 insulators for the drive of the brush shafts designed as a cluch, 2 insulators for the extracting srews, and 2 sieve frames for each flock dosing unit.
